Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking for tutorials for various codes like NRZ, RC5

Status
Not open for further replies.

khongai

Full Member level 4
Full Member level 4
Joined
May 20, 2005
Messages
229
Helped
16
Reputation
32
Reaction score
11
Trophy points
1,298
Activity points
2,919
Code ?

Hi all,

there're a lot of code ( such as manchester, NRZ, ... and RC5).
please help me about tutorial of those code
 

Re: Code ?

Just google around for "Line Coding", lots of hits. It usually describes the logic representation of "0" and "1" bits.
There are other coding techniques other than line coding.
From a stream of raw data, you first carry out source (aka compressional) coding, then channel (aka error correction) coding, followed by line coding, then modulation. On the receiver end, you carry out the reverse.

As for RC5, I would term it more of a protocol than a code, normally used with remote controls.
 

    khongai

    Points: 2
    Helpful Answer Positive Rating
Re: Code ?

especially you should look at the encoder/decoder systems

also you can chek analog & digital communication systems

nowadays we have been working on the rfid systems related to manchester 32&64
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top