Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to design a circuit to generate 45v 650us-width pulse?

Status
Not open for further replies.
P

philipwang

Advanced Member level 4
Full Member level 1
Joined
Mar 30, 2005
Messages
102
Helped
13
Reputation
26
Reaction score
2
Trophy points
1,298
Location
Sz China
Activity points
2,161
charge pump problem

Dear all,

Input 5v 10us-width pulse, how to design a circuit to generate 45v 650us-width
pulse? Because of no high voltage supply only 5v power supply I think charge pump must be used, but how to generate so high a voltage up to 45v through charge pump?

Thx for your attention and help!
 

charge pump problem

you can try voltage multiplier
 

    P

    philipwang

    Points: 2
    Helpful Answer Positive Rating
Re: charge pump problem

simple boost converter can be ur best choice.
need only one inductor , one external MOS, one diode & CAPs
 

    P

    philipwang

    Points: 2
    Helpful Answer Positive Rating
charge pump problem

Btrend, Can you advise one product style market supplied? As you mentioned above, whether it means that one can buy these devices from market and then design it for using?

Thx!
 

Re: charge pump problem

try this
**broken link removed**
 

Re: charge pump problem

hi,

you can use dc-dc choper circuits(step up choper).

bye
 

Re: charge pump problem

job hunting
 

charge pump problem

you can use boost to achieve the high voltage but 45v is a high voltage for the device
 

Re: charge pump problem

thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top