Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Purpose of prepeg and core

Status
Not open for further replies.
S

srilu

Junior Member level 3
Junior Member level 3
Joined
May 6, 2005
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,471
prepeg

In PCB manufacturing
I know that core (laminate..FR4 etc.,) acts as insulator b/w two copper foils.
But what is pre-peg and what is its purpose ?

regards,
Srilu
 

prepeg pcb

Prepreg is a non-cured glass/epoxy sheet that acts as the glue during multilayer lamination - a simplified example is that the epoxy between the copper sheets in a piece of core material is cured prepreg.

SiGiNT
 

pre peg

Core is the dielectric material between two copper layers which forms a Laminate, & prepreg is the dielectric material which is used to bond thes laminates
 
  • Like
Reactions: snaku

    S

    snaku

    Points: 2
    Helpful Answer Positive Rating
prepeg in pcb

FYI:

You cannot call the laminate as insulator. It has dielectric constant and provides capacitance by which return current to pass from signal to gnd.
 
  • Like
Reactions: snaku

    S

    snaku

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top