Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Inferring design elements in Verilog

Status
Not open for further replies.
G

Giox

Newbie level 4
Newbie level 4
Joined
Jul 12, 2005
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,332
Hello everybody,
I have some problem with Xilinx libraries. In fact I'm programming in Verilog HDL and I would like to use the specific design elements provided by xilinx. However in the Libraries Guide many times the inferred code is not shown. Do you know what is the pdf document that provide the code?
Thanks a lot to everybody
Giovanni
 

Can you give us a specific example? The info may not exist. Why do you need it? That may help us answer your question.
 

    G

    Giox

    Points: 2
    Helpful Answer Positive Rating
Giox said:
Hello everybody,
I have some problem with Xilinx libraries. In fact I'm programming in Verilog HDL and I would like to use the specific design elements provided by xilinx. However in the Libraries Guide many times the inferred code is not shown. Do you know what is the pdf document that provide the code?
Thanks a lot to everybody
Giovanni
Click to expand...

Hi giovanni...
I f you are using XILINX ISE software then you can use the templates provided by Xilinx itself. You can open the templates by going to EDIT menu and clicking on language templates. Here you will get the code for inferring the xilinx primitives and other components in both Verilog and VHDL. Hope this helps.

Best Regards,
 

    G

    Giox

    Points: 2
    Helpful Answer Positive Rating
Thanks to both echo47 and dBUGGER, in fact I'm interested in the ADSU block, but I saw that there is no template provided. However thanks a lot (I didn't know until today the use of templates in ISE 7.1).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top