Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
for this you will need to know first the value of CL of the xtal , the value of the capacitors you will use are double than this value of CL , the capacitosr you wil use will need to be equal ..this is theoretical..practical ..you will use some capacitors more smalest that double ..1.5 to 1.8 X CL
You should know the Loading Capacitance or CL of the Quartz crystal what you use. Only when the Quartz crystal used in your circuit is shunt with the capacitor with the value CL can your Quartz Crystal be an oscillator oscillate at center frequency.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
