Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Car Radio Frequency Converter

Status
Not open for further replies.
K

kasamiko

Full Member level 3
Full Member level 3
Joined
May 23, 2004
Messages
154
Helped
16
Reputation
32
Reaction score
18
Trophy points
1,298
Location
Philippines
Activity points
1,121
la1186n schematic

Hi,
Anybody has a link for scematics/plan for a simple Car Radio Frequency Converter to be use on Japanese standard radio..76-90mhz to 88-108 mhz?

BR

rhonn
 

As both ranges overlap you should be able to re-tune from one to the other without a converter ..
Regards,
IanP
 
Well.. better said than done..
But I don't have any idea what to tweaks..what coil to expand..

rhonn
 

Other option is to build a mixer and add 10MHz to the lower band and filter out the F-10MHz product leaving only F+10MHz.
This can be done, for example, with dual-gate MOSFET or off-the-shelf mixer IC su as this: **broken link removed**
Regards,
IanP
 
I found a similar circuit using a 9 pins SIP IC I suspected it is iether LA1186N or TA7378.. All the ceramisc capacitors values has been ERASED including the parts number of the IC.
I'll trace the schematic and post it here..

rhonn
 
As promised..looks here's the circuit..with some values of capacitors ERASED by the manufacturer..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top