Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

waveguide filter fabrication

Status
Not open for further replies.
A

amicloud

Full Member level 2
Full Member level 2
Joined
Oct 11, 2004
Messages
138
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Activity points
1,100
must fabricate

I fabricated the waveguide filter in this way:a cover and a cavity,and connect them with screws.but find the response is poor,and s11**2+s22**2 is not equal
to unity.so is the fabrication leads to power leakage?the s11 is -10db and s21 is -10dB.
is it a must we must fabricate waveguide line firstly,and then insert posts into it?
if not,why the response becomes so poor?

Liu Yun
 

Dear amicloud,

I have same experiance of phenomenon. Of course, I don't know the fabrication situation; structure of filter. I guess you apply inductive iris filter.

The problem is the flatness of surface in body and cover.

Small gap exists in connect plane. And if you fabricate it by CNC, body is twist, maybe.

You must check it.

I suggest method.

1. grinding.
2. solder cream including silver
3. more many screw

If you share structure, I can check it more detail.

Thank you.
 

    A

    amicloud

    Points: 2
    Helpful Answer Positive Rating
dear HOHOH,
thank you so much. I will try your methods.

good luck with your everyday life!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top