Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to connect an LCD (2*16) to Z80

Status
Not open for further replies.
A

arash_micro

Member level 5
Member level 5
Joined
Jan 25, 2005
Messages
91
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
739
Hi
can anyone say how we can connect an LCD (2*16) to Z80
Dose anyone have temperature meter with Z80 and LCD.
thanks
 

Z80 and LCD

without the interface specification, no one can help you.
 

Z80 and LCD

do u use one of them?
 

Z80 and LCD

Hi
You Can Connect Lcd Data Bus to Z80 Data Bus
And Find UP Code As LCD Data sheet.
 
Re: Z80 and LCD

Hi, i've realized a z80 sbc with flash, ram, 3 output port and 1 input port.
On one of the out port i've placed the LCD display and on the one pin of the In and Out port i've placed a DS18B20 temperature sensor interfaced with a 7407 for the open collector DS18B20 needed signal.
It works fine and you can see the temperature on the LCD display.

.:Luigi:.
 

Re: Z80 and LCD

Gigillo74 said:
Hi, i've realized a z80 sbc with flash, ram, 3 output port and 1 input port.
Click to expand...

Hi Luigi;
I'm really interested to your z80 project. Do you can share it? Especially the paging for the big flash and ram, and the flash routines are interesting...
I'm (was) an old z80 fan :|
Thanks
zuisti
 

Re: Z80 and LCD

zuisti said:
Gigillo74 said:
Hi, i've realized a z80 sbc with flash, ram, 3 output port and 1 input port.
Click to expand...

Hi Luigi;
I'm really interested to your z80 project. Do you can share it? Especially the paging for the big flash and ram, and the flash routines are interesting...
I'm (was) an old z80 fan :|
Thanks
zuisti
Click to expand...

Hi zuisti,
excuse me if i reply only now.
In this days i pubblic on this topic the schematics and the PCB of my Z80 SBC.
I'm working also on the BUS expander, to expand the system, video board, a flash ZIF socket expander to easy program the flash and finally a bootloader circuit and firmware that permit to program the entire system with RS232 serial port.
Luigi.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top