Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How can obtain the+15 volt or +24volt

Status
Not open for further replies.

sraiderk

Member level 1
Member level 1
Joined
Mar 9, 2005
Messages
39
Helped
11
Reputation
22
Reaction score
1
Trophy points
1,288
Activity points
1,591
I have changable dc voltage between 5 to 9 VDC I want to produce constant +15Vdc or Constant +24Vdc from my source(between 5 to 9 VDC ). Anybody have any idea or circuit.
 

You can use boost converter to achieve 15Vdc and 24Vdc. You may try the online design tool frm National Semicondutor:

**broken link removed**
 

This depends on the current you require in your application.
Easy solution is , for example, the LM2577 regulator ( **broken link removed** ).
So, how many AmPs. mAmps, µAmps dou you need?
Regards,
IanP
 

    sraiderk

    Points: 2
    Helpful Answer Positive Rating
I am sorry. I need maxsimum 10mA for 24VDC
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top