Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Unknown inductor and smps transformer

E

Edblue95

Newbie
Newbie level 3
Joined
Jun 3, 2024
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
26
Hi good day everyone I have an inquiry about what type of inductor and smps transformer it is from the two pictures. I think the smps transformer is slot type not sure. The inductor is radial that's half inch thick or almost .5 inch and the smps transformer is beige with layers here are the pictures. For replacement because of dust.
Screenshot_20241109-111313_Drive.jpg
Screenshot_20241028-215111_Drive.jpg
 
Sort by date Sort by votes
"replacement because of dust"? brush it clean of blow the dust away with compressed air, they are not damaged.

The inductor is a standard Ferrite cored one, you would need to measure its inductance to find a replacement but the chances of it being faulty are almost zero.
If you mean the 'transformer on the right in the second picture, it looks like a transformer but it is actually a filter choke to reduce radiated interference down the power cord (black and white wires). Again, failure is extremely unlikely, I don't think I have ever seen a faulty one. Look on the web sites of TDK and Murata, they are the main manufacturers of these devices.

Brian.
 
Upvote 0 Downvote

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top