Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Is the H-plane or E-plane in the HFSS if setting symmetry?

tony_lth

tony_lth

Advanced Member level 5
Advanced Member level 5
Joined
Jul 28, 2010
Messages
2,098
Helped
377
Reputation
756
Reaction score
368
Trophy points
1,363
Location
Beijing
Activity points
12,727
Hi, Gurus,
I set a model in HFSS as the following picture. The port is set at the X direction terminal. For simple in HFSS, I always set symmetry along the Y-axis and set the H-plane.
Now I have to set symmetry along X-axis, is the symmetry plane still H-plane? Or E-plane?
Best,
Tony Liu
20240611.PNG
 
Sort by date Sort by votes
H-plane it will became E-plane.
When you change the symmetry axis, essentially you are changing the orientation of the antenna.
 
Reply

    tony_lth

    tony_lth

    Points: 2
    Helpful Answer Positive Rating
Upvote 0 Downvote

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top