Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help for NEC-Win Plus

Status
Not open for further replies.
G

GeekWizard

Full Member level 1
Full Member level 1
Joined
Oct 24, 2004
Messages
98
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,288
Location
United Kingdom
Activity points
853
necwin+

Hi all,

1) Somebody had previously mentioned the following link for help manuals but now its no more open for all.. Any one having the help manuals, kindly share it.

**broken link removed**

2) Can I modify anything in the NEC Code page? If yes, how? (The "NEC Code" tab at the bottom of the main interface).

3) Surface Modeling: Isn't there any drag-drop editor type thing in Win Nec which will help in modeling a 3D surface? or will I have to construct the whole thing using wire gridding??

I'm a newbie in Win NEC. Any help will be appreciated.

Thankx
 

Hi GeekWizard

Do U mean the windows helpfiles ?
I have v.1.1 winhelpfiles which I can email to you if U do not have them
but no separate pdf's.......
Long time I did use the WinNEC+ however......... I think you can change the NEC code manually because the interface is just a shell around the main NEC2 engine.

rgds
Mike
 

hello Mike,

Yes I need help files for Windows NEC.

Will really appreciate if you can send 'em.

Thanks
 

Hi Geekwizard

As promised, below the helpfiles for WIN for NEcWin+, v.1.1.
I also have some demo to generate structures, called QNEC. It's a demo only and you cannot change the interesting parts for the structures.
Generating complex structures is a real problem in NecWin. Here SuperNec is better because it has a build-in structure generator for most used antennas that make life a lot easier.
I am not sure u have the NEC2 manual, I also attach here for reference.

regards,

Mike
 

    G

    GeekWizard

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top