Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

difference between SNR SNDR SFDR

Status
Not open for further replies.

avinash

Full Member level 3
Full Member level 3
Joined
Jul 24, 2004
Messages
160
Helped
10
Reputation
20
Reaction score
3
Trophy points
1,298
Activity points
1,527
sndr snr

thanks in advance
 

snr sndr

Try to find the meaning of these terms here:
**broken link removed**
and here:
**broken link removed**
(page 9)
Regards,
IanP
 
snr and sndr

SNR: Signal to noise ratio. It's the ratio of signal level to noise level. No non-linearities included in this measurement

SNDR: Signal-to-noise + distortion ratio. It is the ration of signal power to (noise power plus spuriouse harmonics power). These spurious harmonics are those appearing to circuit non-linearity.

SFDR: Spurious free dynamic range. The dynamic range through which no non-linearity exists.

Hope this helps
 

    avinash

    Points: 2
    Helpful Answer Positive Rating
sndr and snr

which of the three has maximum value in dB for a specific application
 

snr sfdr

avinash said:
which of the three has maximum value in dB for a specific application

I think you can compare only between SNR and SNDR. Usually SNR would be larger than SNDR since the spurs have much larger power than noise (Spurs are deterministic tones resulting from nonlinearities as opposed to the distributed noise power)
 
  • Like
Reactions: letsrock

    avinash

    Points: 2
    Helpful Answer Positive Rating

    letsrock

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top