Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question about setting up parameters for impedance matching on ADS

Status
Not open for further replies.
N

Noobmaster6910

Newbie
Newbie level 4
Joined
Jan 31, 2023
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
41
I am having proble while doing impedance matching on L-network. As my circuit indicated below, my result on S11 is not the same as in the 2nd picture, which is not as pointy as mine. Can you suggest which parameters should I chan
1675258005281-png.180998
ge to get the result like in the 2nd picture, all of the values of L,C and the microstrip line I derive from microstrip line calculator.
 

Attachments

  • 1675257880205.png
    1675257880205.png
    49.6 KB · Views: 133
  • 1675258080073.png
    1675258080073.png
    105.6 KB · Views: 135
  • 1675258311266.png
    1675258311266.png
    53.2 KB · Views: 137
  • 328076098_1300292010546577_9826091120686232_n.png
    328076098_1300292010546577_9826091120686232_n.png
    39 KB · Views: 135
  • 328299155_1328469104667000_2776380691466139002_n.png
    328299155_1328469104667000_2776380691466139002_n.png
    10.8 KB · Views: 135
  • Screenshot 2023-02-01 203343.png
    Screenshot 2023-02-01 203343.png
    28.6 KB · Views: 130

Sort by date Sort by votes
It is not possible to interpret what the simulation step size that you are using is (which would determine the number of frequency points) but it needs to be changed. A good starting point would be 101 points (Step-size of 30 MHz for 1GHz to 4GHz sweep) would give a smoother response.
 
Upvote 0 Downvote
RealAEL said:
It is not possible to interpret what the simulation step size that you are using is (which would determine the number of frequency points) but it needs to be changed. A good starting point would be 101 points (Step-size of 30 MHz for 1GHz to 4GHz sweep) would give a smoother response.
Click to expand...
Thank you, somehow the curve is perfectly matched.
 

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top