Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
This site https://www.computerhope.com/dosext.htm#i lists all extensions and gives links to software that will open files with them. Your .job extension is not listed.
After doing a google search for .job extension I discovered that this is a task scheduler file. **broken link removed** will tell you more about it.
If the version of the job file is 6 or 7 you can open it with powerpcb versions 2.01, 3.51, 4.0, or 4.01. I am not sure about 5 as I do not use it.
If it is version 3 or 4 you have to open it with dos version 6 or 7, then save it as 6 or 7 then open it with one of these windows versions.
Converting from 3 or 4 might have some problems with copper polygons, I am not sure as I do not open version 3 or 4 files very often.
If you want me to convert the file for you pm it to me as I have most of these versions installed including v6 of perform for dos.
If you send the file to In*o*v*da they might be able ton convert it to the version that you are using.
Be sure your software is licensed and maintenence is paid.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
