Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What value resistors are these?

Status
Not open for further replies.
C

cupoftea

Advanced Member level 6
Advanced Member level 6
Joined
Jun 13, 2021
Messages
3,057
Helped
62
Reputation
124
Reaction score
139
Trophy points
63
Activity points
15,948
These measure zero ohms, and i suspect they failed short.

The top ring looks blue on the photo, but on the bench it looks violet.
So its basically Violet Green Grey Gold Black

But that doesnt add up, as it would be 7.5E8 ohms which is 750 Megohms

So i am thinking it must really be meant to be violet green black gold violet


So i am thinking 7.5 ohms
 

Attachments

  • resistors.jpg
    resistors.jpg
    76.8 KB · Views: 192

Sort by date Sort by votes
Hi,

I think

violet = 7
green = 5
black = 0
--> total 750

Multiplier
gold = 0.1
--> total 750 x 0.1 = 75.0 Ohms

tolerance:
--> violet = 0.1%

Klaus
 
Upvote 0 Downvote
Thanks, for some reason its measuring zero ohms. I desoldered it to measure it. It doesnt look damaged or burned.
It looks like an axial 2w...so i would be surprised if it was 0.1% tolerance
 

Upvote 0 Downvote
Hi,

you may cross check the ohmmeter with a good resistor in the expected range.

It´s not uncommon that 2W resistors are also 0.1% tolerated.

But for sure there is a chance that it´s a different ohm value or a different device.
Some inductors come in axial package with colored markings. (But I tend to say yours are resistors)

Klaus
 
Upvote 0 Downvote
Thanks, how do you know they are fusible resistors?

In fact, the colors are actually Violet Green Grey Gold Black

So surely this means a 75e8 resistor of tolerance 5%?
 
Last edited:

Upvote 0 Downvote
Hi ,
Now found out, these are 0.075 Ohm, 5% resistors, 3W

I dont know how Violet-green-grey-gold-black gives 0.075R ?

(in the top post, the violet looks like blue, but i gaurantee its violet in "real life")
 

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top