Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Poly branches

Status
Not open for further replies.
I

ICLAY

Junior Member level 1
Junior Member level 1
Joined
Jul 14, 2020
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
96
IS the poly branches is equivalent to fingers and no. of groups is equivalent to multiplayer
 

poly branches could indicate the numer of fingers in a device( never heard it described as such) , eg, width =1x 10um or 2x 5um. No of groups not a common name for multiplier.
Grouping is normmally associated with grouping common transitors or groups of resistors or both etc.
 
  • Like
Reactions: ICLAY

    I

    ICLAY

    Points: 2
    Helpful Answer Positive Rating
I have never seen that terminology used. Maybe
you would get better answers if you provided an
example, document snippet or context.
 
Thank you all for your answers, much appreciated.

it’s 5n documents,I can’t share unfortunately.

it states the two new expressions.Most probably they are as k_90 mentioned
 

Are you using GAAFET process?
If yes, are you free to choose number of sheets per transistor? If yes, then this parameter might be an equivalent to fingers.

Of course above are only my speculations (I also don't remember to met such terminology).

In principium, all answers you should get from foundry (maybe they provides some tutorials).
 

Thank you, Dominik, it's FinFET, not GAAFET.
Unfortunately, tech files didn't mention these expressions except in just one slide
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top