Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me with designing sdram control on video

Status
Not open for further replies.
A

alpacinoliu

Member level 3
Member level 3
Joined
Nov 14, 2004
Messages
58
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
464
sdram control on video

i need to design the sdram control which is to used video?
three(R，G，B)bytes should be put in the same blank or in the different blanks, which is better?
 

sdram control on video

i thinks that r,g ,b should be put in the same bank
 
sdram control on video

why ? you should give me more details
 

Re: sdram control on video

I think your design is for overdriving feature. If you want to reduce the operation frequency, you have to pay more data bus (pin number) and SDRAMs. R,G,B are total 24 bits. If the input is two channel, the total number of bit will be 48 bits. As I know, the data bus of SDRAM is 16 bits or 32 bits. It is better that you have to shrink your data stored in SDRAM to 32 bits. And you must have a buffer to store the data temporarily.
 

Re: sdram control on video

I think pu them in a same bank is better, so you can access them sequentially.




alpacinoliu said:
i need to design the sdram control which is to used video?
three(R，G，B)bytes should be put in the same blank or in the different blanks, which is better?
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top