Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Driver stage of doherty power amplifier

Status
Not open for further replies.
M

Mabrok

Full Member level 4
Full Member level 4
Joined
Mar 1, 2017
Messages
223
Helped
0
Reputation
0
Reaction score
1
Trophy points
18
Visit site
Activity points
1,597
Hi,
I will use PA driver stage in front of the full DPA to compensate for gain degradation. My question is, Should I consider the power consumption of the driver stage in the full DPA efficiency calculations and measurements? Thanks in advanced.
 

You have to take in consideration the driver power consumption from the moment that PAE (power added efficiency) is function of input power.
 

Attachments

  • PAE.jpg
    PAE.jpg
    12.9 KB · Views: 124

    M

    Mabrok

    Points: 2
    Helpful Answer Positive Rating
vfone said:
You have to take in consideration the driver power consumption from the moment that PAE (power added efficiency) is function of input power.
Click to expand...
Thanks for your response. In my design i only consider the DE (drain efficiency) which is equal to Pout/Pdc(DC power cosumption). how to do with this?
 

You need to take into account the DC power consumption of the driver amplifier.
 

    M

    Mabrok

    Points: 2
    Helpful Answer Positive Rating
vivekroy said:
You need to take into account the DC power consumption of the driver amplifier.
Click to expand...
That means I will lose the efficiency that i have achieved during DPA design as an additional power consumption will be added to that one from DPA. Any suggestion regarding this issue?
 

PAE equation stated that if you have less input power (using a driver) the efficiency is higher. So this should compensate somehow the DC power consumption of the driver.
 

    M

    Mabrok

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top