Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Smith chart problem in ADS

Status
Not open for further replies.
J

jihen

Junior Member level 3
Junior Member level 3
Joined
Apr 17, 2020
Messages
31
Helped
0
Reputation
1
Reaction score
0
Trophy points
6
Location
Algeria
Activity points
261
Hello, can anyone help me.
I have a rectifier as shown in attachment, and i want to make a matching circuit using smith chart utility . when i open it i got this problem. so please help me to solve it.
Capture1.PNG


Erreur.PNG
 

    K

    kheirolah

    Points: 1
    I also have this problem. why ADS_SmithChart Utility doesen't build "TLIN" in hiearchy subcircuit ?
Did you design the matching circuit ?? There should be sub-circuit that has already been designed before in it.
You cannot use this block as you wish..You have to design a circuit then you can place it in another circuit.
 

    J

    jihen

    Points: 2
    Helpful Answer Positive Rating
BigBoss said:
Did you design the matching circuit ?? There should be sub-circuit that has already been designed before in it.
You cannot use this block as you wish..You have to design a circuit then you can place it in another circuit.
Click to expand...

i design my circuit and place smith chart but when i want to open it it doesn't work.
do you mean that i have to change the design ?
 

jihen said:
i design my circuit and place smith chart but when i want to open it it doesn't work.
do you mean that i have to change the design ?
Click to expand...
I mean have you ever designed the matching circuit by using Smith Chart Utility ?? If you have done, you should normally see the sub-circuit when you go into hierarchy down..
 

    J

    jihen

    Points: 2
    Helpful Answer Positive Rating
BigBoss said:
I mean have you ever designed the matching circuit by using Smith Chart Utility ?? If you have done, you should normally see the sub-circuit when you go into hierarchy down..
Click to expand...
Thank you sir :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top