T
treez
Guest
Hello,
We wish to use the LM2936M linear regulator for vin = 24v, vout = 5v, iout = 6mA.
Page 14 says Cout must be 10uF and with ESR minimum of 0.3 Ohms.
Do you think I really need to add a 0.3R resistor to a 10uF ceramic……specially for this low load current?
LM2936 datasheet
https://www.ti.com/lit/ds/symlink/lm2936.pdf
We wish to use the LM2936M linear regulator for vin = 24v, vout = 5v, iout = 6mA.
Page 14 says Cout must be 10uF and with ESR minimum of 0.3 Ohms.
Do you think I really need to add a 0.3R resistor to a 10uF ceramic……specially for this low load current?
LM2936 datasheet
https://www.ti.com/lit/ds/symlink/lm2936.pdf