Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Program Using SST EasyIap boot strap loader

Status
Not open for further replies.
G

gauravkothari23

Advanced Member level 2
Advanced Member level 2
Joined
Mar 21, 2015
Messages
642
Helped
5
Reputation
10
Reaction score
4
Trophy points
1,298
Activity points
6,934
Hi all..
i am using SST89E516RD2 for one of my project.
when i try to program the DIP controller using SST EasyIAP boost strap loader software it gives me an error that "FAILED TO SETUP RS232 CONNECTION WITH TARGET MCU". but the same is easily programmed using flashmagic software.
But again when i use SMD package for the same, the controller is not programmed using EasyIAP or even with flashmagic.
I am using a TTL converter to program.
 

    B

    Brandon9943

    Points: 0
    I have the same issue and wondered if you came right
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top