Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Orcad - 7-segment LED

Status
Not open for further replies.
T

tec1

Newbie level 2
Newbie level 2
Joined
Mar 15, 2005
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,299
7 segment orcad

I'm new to OrCAD, and I need to place a 7-segment LED, but don't know the part number or name. Anyone?

thanks
 

orcad 7 segment

first let me tell u that Orcad is a boring software. U have to be patient to learn that.

Coming back to ur problem, i can say that before making a PCB layout u must make a 'Schematic Diagram' of ur circuit and that can be made in the "Layout" which automatically gets insalled during the Orcad installation.

In 'Layout' there is an option 'Components' on the left hand side of screen. In that u first have to add all the libraries which are copied during the installation but not yet installed.

After that its very simple. U simply type ur component name & the entire list comes. U just have to pick the required onr and drop on the screen, its schematic will appear.
 

orcad 7-segment

You can also make a part in Caputre. Post of Bhavik has confused, whether you are asking about Orcad Capture or Layout. If you are working with Layout you have to make your own footprints by looking at the dimensions in the datasheet.
 

orcad led

thanx Jack for correcting me.

well, i m also a beginner for Orcad. May be u can guide tec1 better with his/her problems.
 

seven segment orcad library

thanks, but I'm not that newbie, I've already designed my circuit "in Capture CIS", but missing the 7-segment. I searched for it using all keywords, but to no avail..

And do you know any software that is more professional and powerfull than OrCAD?

thanks again for all
 

7-segment ใน orcad

you must design the 7segment in the file->new->library vy graphic and pin tool. i upload this later

Added after 1 minutes:

library is:
 
  • Like
Reactions: Baccano and aega90

    V

    Points: 2
    Helpful Answer Positive Rating
    A

    aega90

    Points: 2
    Helpful Answer Positive Rating
    B

    Baccano

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top