Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How do I design a 2 input or 3 input NAND gates using a 4 input NAND gate (like 7420)

Status
Not open for further replies.
S

suman28pandit

Newbie level 2
Newbie level 2
Joined
Apr 25, 2017
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
15
I want to design a selectable input NAND gate using IC 7420 which should work as a 2- or 3-input NAND gate even when 2 or 3 inputs are applied
 

Hi,

...or tie unused inputs to an appropriate logic level with a suitable value resistor.
 
If I understand you right, you want to let some pins occasionally be unconnected?
Just pull-up these pins. In case they are unconnected, they will have high level and the gate will act as 2- 3- input NAND (or NOT gate if you use 1- input).
 
Hi,

A bit late, but still...

0 + 0 + 0 + 0 = 1
1 + 0 + 0 + 0 = 0
0 + 1 + 0 + 0 = 0
0 + 0 + 1 + 0 = 0
0 + 0 + 0 + 1 = 0
1 + 1 + 0 + 0 = 0
etc.

NAND is only all 0s make a 1, any 1s make a 0.
 

d123 said:
Hi,

A bit late, but still...

0 + 0 + 0 + 0 = 1
1 + 0 + 0 + 0 = 0
0 + 1 + 0 + 0 = 0
0 + 0 + 1 + 0 = 0
0 + 0 + 0 + 1 = 0
1 + 1 + 0 + 0 = 0
etc.

NAND is only all 0s make a 1, any 1s make a 0.
Click to expand...

That is NOR, not NAND ;-)
NOR is 0 if any of the inputs is 1.
NAND is 0 if all of the inputs are 1.
 

Altaero said:
That is NOR, not NAND ;-)
NOR is 0 if any of the inputs is 1.
NAND is 0 if all of the inputs are 1.
Click to expand...

Oh dear, you're right, just as well you pointed it out, thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top