Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Can I obtain double 4-20ma output from one 4-20ma output?

Status
Not open for further replies.

otuzsubat

Member level 4
Member level 4
Joined
Jun 7, 2004
Messages
72
Helped
7
Reputation
14
Reaction score
5
Trophy points
1,288
Location
istanbul, Turkey
Activity points
668
double 4-20ma output

i have a sensor that produces 4-20ma signal. is there any way to obtain 2 output from one 4-20ma output. i think it can be done by opamps.
 

Re: double 4-20ma output

All what you need is a termination resistor of, say, 250Ω on the 4-20mA current loop.
This will generate voltage in the range of 1V(4mA input) to 5v(20mA). This voltage can be used to control two independent voltage-to-current converters which can be of sinking(to ground) or source(from the Vcc) type.
Examples of the voltage controlled current sources you will find here:
**broken link removed**
and another solution of sinking voltage controlled current generator is below (to have two outputs disconnect both collectors and treat the as individual current sources)
 
Re: double 4-20ma output

i found excellent product to obtain double 4-20ma output.
The product site is;
h**p://www.phoenixcontact.com.tr

and the product code is;

WAS 5 CCC 2OLP
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top