Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to delete a connection between connector and resistor in allegro 16.3..

Status
Not open for further replies.
S

sandeep204

Newbie level 2
Newbie level 2
Joined
Feb 27, 2017
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
16
hi
i have only pcb design file in allegro16.3..and i don't have any schematic file.now the problem is, i need to delete a connection between connector and resistor.someone who can help me out of this...i don't have schematic file i have only pcb design file.

Thanks
sandeep
 

its not working cyberrat..and in the right click option there is no del option...
 

select the trace you want to delete then press Ctrl + Del, now if it does not go! right click then select Unfix then try again.

Ciao!
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top