Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Bobbin depth of PQ3220 former?

Status
Not open for further replies.
T

treez

Guest
Newbie level 1
Do you agree that the “bobbin depth” (the space into which layers of windings can be fitted) for the Ferroxcube PQ3220 core is 5.4mm?
{ [26.7mm-15.9mm]/2 = 5.4mm }

Ferroxcube PQ3220 datasheet:
**broken link removed**
 

Well your interpretation is correct
Bobbin depth (the depth into which all layers of windings can be fitted) or winding height = 26.7mm-15.9mm]/2 = 5.4mm

Bobbin width (the length into which one layers of windings can be fitted) or winding width = 8.9mm
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top