Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Negative Capacitances by Cadence

Status
Not open for further replies.
A

aryajur

Advanced Member level 3
Advanced Member level 3
Joined
Oct 23, 2004
Messages
793
Helped
124
Reputation
248
Reaction score
38
Trophy points
1,308
Location
San Jose, USA
Activity points
7,788
When I see the value of Cgs from the Result Browser in Cadence why do I see a negative value??
 

Caps can be negative in spice matrix solving, just like any other spice circuit matrix data, that is voltages, currents, resistances, inductances, etc.
Just as a simplified illustration, voltages in Kirchoff equations can be negative or positive, right? Their derivatives can be positive or negative too, right? Mathematically speaking, caps are just coefficients, connecting currents with voltage derivatives, right? Now you see that caps can be positive and negative, at least in spice circuit matrix. Nothing more than that.
 
  • Like
Reactions: milvapp

    M

    milvapp

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
aryajur said:
So that means the value is the absolute value...?
Click to expand...

Well, treat them as the circuit matrix components which incidenatally have some resemblance to capacitors. Note that sometimes they are not symmetrical. For example, Cdg is not necessarily equal to Cgd, even neglecting the minus sign.
 
I think that is because of the transcapacitance modeling in SPICE. The definition for Cgs is
Cgs=-dQg/dVs. The "-" here is just the definition of the direction of charge flow.
 

    A

    aryajur

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top