Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

regarding microstrpline

Status
Not open for further replies.
S

soundav

Junior Member level 3
Junior Member level 3
Joined
Jul 14, 2016
Messages
28
Helped
5
Reputation
10
Reaction score
5
Trophy points
3
Activity points
166
can anyone help me in designing a bandpass filter for 2GHz to 6GHz using microstripline
i would mainly like to know how the lumped elements are converted to striplines.
thanks in advance
 

Hello @soundav,

I understand you want to design a microstrip with distributed elements.

I highly recommend you this book

https://www.wiley.com/WileyCDA/WileyTitle/productCd-0470408774.html

The main idea is that a lambda quarter transmission line would act like a LC resonator.
There are plenty of topologies to implement a bandpass filter, like:
End-Coupled Half-Wavelength Resonator Filters
Parallel-Coupled Half-Wavelength Resonator Filters
Hairpin-Line Bandpass Filters
Interdigital Bandpass Filters
Combline Filters
Pseudocombline Filters
Stub Bandpass Filters

Maybe for your application I may recomend a levy uwb filter. There is some introduction at my bachelor degree thesis (point 2.2.2) :

https://ddd.uab.cat/record/131445?ln=es

BR
 
Thanks a lot DavidZlavan
Ill surely look into your suggestions.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top