Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Why is VSWR used instead of a reflection coefficient directly?

Status
Not open for further replies.
C

CHL

Member level 3
Member level 3
Joined
Jan 20, 2015
Messages
60
Helped
2
Reputation
4
Reaction score
2
Trophy points
8
Activity points
550
Hello

I have a basic question about VSWR.

Based on my understanding, VSWR has been used to show a matching statu between a power amp and an antenna, and it is easily measured when a wave guide is used for a connection.

However, a reflection coefficient can be more easily measured in an IC level.

A calculation is needed to get VSWR from the reflection coefficient.

Why still is the VSWR used normally instead of the reflection coefficient?

Is it because of just historical reason?
 

reflection coefficient and VSWR are measured in exactly the same way. not sure what you are talking about.
 

biff44 said:
reflection coefficient and VSWR are measured in exactly the same way. not sure what you are talking about.
Click to expand...

Let's say we make a RF IC

In the IC, we want to include a block to check if the signal is reflected or not, in other words, how well the signal is transferred to an antenna without reflection.

People normally use a parameter, VSWR, to check it instead of a reflection coefficient.

I want to know why

Thanks
 

Some people want to compare numbers in VSWR, others want to compare numbers in return loss or reflection coefficient. It's also handy to hide minor glitches in the performance.
 
  • Like
Reactions: CHL

    C

    CHL

    Points: 2
    Helpful Answer Positive Rating
biff44 said:
reflection coefficient and VSWR are measured in exactly the same way. not sure what you are talking about.
Click to expand...
I disagree with biff44,VSWR and Reflection coeff are not measured in the same way.
To measure VSWR Vmax and Vmin of a standing wave is measured,using a probe,this is an ancient method when directional couplers were not around.Once Directional couplers were invented,people started measuring reflection coeff directly.
Though both measures the order of mismatch at the load.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top