Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Low profile planar U,I core wanted (powdered iron)

Status
Not open for further replies.
T

treez

Guest
Newbie level 1
Hello We wish to do a low profile, PCB_integrated common mode choke for our 1V5,65A output SMPS.
Can you get planar U,I cores off the shelf (powdered iron)?

..we will just insert it round the go and return of the PCB tracks by using cutouts for the side limbs of the U,I core.
 

For a common mode choke I will prefer Ferrite core,
If a differential/Output inductor go ahead with Powdered iron.

Powdered iron core available in Magnetic inc
https://www.mag-inc.com/products/powder-cores
If it is PCB integrated, should take care of rated current in the track
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top