Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Verilog code for FIR Filter

Status
Not open for further replies.
A

arunragavan

Advanced Member level 1
Advanced Member level 1
Joined
Jul 1, 2004
Messages
415
Helped
30
Reputation
60
Reaction score
9
Trophy points
1,298
Location
India
Activity points
5,028
fir filter verilog

Well guys can anyone gimme an example verilog code for FIR filter.. ive done n VHDL.. am not any good n verilog.. some one who can help me..
with regards,
 

verilog code for fir filter

My opinion is that if you have a ready working code in VHDL then the best is to translate it in Verilog using a tool but better doing it by hand.
It's time consuming yes but if you take it line by line and using a Verilog book then you will have the benefit of learning Verilog too.
And from my experience you need to be familiar with both languages.
If you need any help with the translation we are here !!
 
fir filter vhdl code

it is not different to convert vhdl to verilog by using tools
better do it ur self then only u can understand both.
it is not difficult to do for HDL desigers.
try by urself
bye
 
fir verilog

Go to Xilinx appnotes web-page. There are huge of various examples. Several examples - are FIR filters for one- and two-dimentional signals.
 

verilog coding examples

in
h**p://www.@ltera.com/support/examples/verilog/ver_base_fir.html

the example use 3 altera IP(LPM)
is there any example only use RTL (no IP) to implement a simplest FIR?
 

verilog fir

You can think the FIR is consisted of shift registers and multiplier-adders just as figured in the link.

For me, I will coding the all shift-registers in one always block and the remainder combination(*, +) in another always block(Today, the synthesis tool is very powerful, you can leave the effort of combination optimization, especailly mac to tool).

Regards,
Jarod
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top