Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interfacing micro 89c51 to the network via ethernet

Status
Not open for further replies.
T

TheSniper

Member level 3
Member level 3
Joined
Sep 18, 2004
Messages
67
Helped
4
Reputation
8
Reaction score
0
Trophy points
1,286
Activity points
591
Interface to the network

i need to connect the micro 89c51 into the
lan network via ethernnet
Anny sugestions ???????
 

Re: Interface to the network

Hi. Download the book TCP/IP lean.

Or, search within this forum with TCP/IP. You will find a lot of information.
 

    T

    TheSniper

    Points: 2
    Helpful Answer Positive Rating
Re: Interface to the network

this is 8052 for TCP/IP project **broken link removed**
 

    T

    TheSniper

    Points: 2
    Helpful Answer Positive Rating
Interface to the network

i took a look in the 8052 website
but i do not want to interface with an isa card i want to make it just like the serial or the parallel port
meanning i want to connect the micro to the net via rj45.

TheSniper(+)
 

Re: Interface to the network

thanks feiutm9898 for your help
i have found this project (web-51)
it is based on a 8052 MCU
if you have got time pleas check it out and tell me
you opinion i will appreciate it .
thanks

TheSniper (+)
 

Interface to the network

hi sniper if u have any information about power line communication plz send to me about it such any web u know thx
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top