Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DDR3 - timing of bank address

Status
Not open for further replies.
S

shaiko

Advanced Member level 5
Advanced Member level 5
Joined
Aug 20, 2011
Messages
2,644
Helped
303
Reputation
608
Reaction score
297
Trophy points
1,363
Activity points
18,302
Hello,

In DDR3 part of the address lines are dedicated to bank addresses.
When does the bank address gets sampled? Is it during the Row access strobe or during the Column access strobe?
 

In JEDEC spec, JESD79-3F check Command truth table (Table-6)
Back Address BA is there in Bank Activate command and READ/WRITE command.
 
  • Like
Reactions: shaiko

    S

    shaiko

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top