Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST Antenna placement using calculated near field source

Status
Not open for further replies.
H

hof

Newbie level 5
Newbie level 5
Joined
Mar 2, 2010
Messages
10
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,283
Activity points
1,345
Hello,

I would like to compare results from simulations of antenna mounted on UAV using Transient Solver and Integral Solver.

For Integral I will use recorded near field source (simulation of antena placed on infinite groundplane in transient solver).

Do You have any experience with nf box size used to record near field?

The largest dimmension of antenna is 94mm, where wavelength in free space is about 130mm.
 

Hi there,

I believe CST recommends nf box size of 1/4 lambda distance from your radiator.

I've tried it with various sizes, smaller and larger and they seem to return acceptable results (some ripple variation of very small order).
Maybe start off with lambda/4 and try different variations of sizes. My guess is that the results would not differ by much and with most applications, would be acceptable.

All the best!
 
  • Like
Reactions: hof

    H

    hof

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top