Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RFID bandwidth at 6.8 GHz?

Status
Not open for further replies.
S

sayyedjamal

Junior Member level 3
Junior Member level 3
Joined
Feb 28, 2013
Messages
27
Helped
2
Reputation
6
Reaction score
2
Trophy points
1,283
Location
Iran
Activity points
1,442
Hi there

If one familiar with RFID systems knows one of the operation frequencies of this systems is 6.8 GHz, however I could not find the bandwidth of RFID at 6.8 GHz. Is this from 6.65~6.95 GHz or not.....???

Can anybody help?
 

davenn said:
6.7 to 6.9 GHz
Click to expand...

Thx buddy....
But how come I could NOT find it in anywhere?
Would you please introduce me a reference for this? Book, paper, etc.

Really appreciate in advance.
Good luck
 

I don't recognize 6.8 GHz as a commonly accepted RFID frequency, it's neither mentioned in FCC or ETSI documents. Where do you see it specified?
 

sayyedjamal said:
Thx buddy....
But how come I could NOT find it in anywhere?
Would you please introduce me a reference for this? Book, paper, etc.

Really appreciate in advance.
Good luck
Click to expand...

hi ya

I found it doing a google search ... have just tried again and cannot find the same article grrrrr
If I find it again I will post a link

cheers
Dave
 
davenn said:
hi ya

I found it doing a google search ... have just tried again and cannot find the same article grrrrr
If I find it again I will post a link

cheers
Dave
Click to expand...

Thx. That will help me a lot...

- - - Updated - - -

volker@muehlhaus said:
I think the authors meant 5.8GHz (ISM band).
If you look at frequency regulations, 6.8GHz is a satellite communication band.
https://transition.fcc.gov/oet/spectrum/table/fcctable.pdf
Click to expand...

Thx, I'll check this out.
But there are other references that tried to reject this band (i.e. 6.8 GHz RFID).

Thx again.
 

sayyedjamal said:
But there are other references that tried to reject this band (i.e. 6.8 GHz RFID).
Click to expand...

My best guess is that someone started with a typo (6.8GHz instead of 5.8GHZ) and others based their designs on that mistake. If you search for "6.8GHz RFID" your edaboard thread is now at position #1, indicating that there are very few publications for that keyword.
 
volker@muehlhaus said:
My best guess is that someone started with a typo (6.8GHz instead of 5.8GHZ) and others based their designs on that mistake. If you search for "6.8GHz RFID" your edaboard thread is now at position #1, indicating that there are very few publications for that keyword.
Click to expand...

Maybe....I don't know....maybe....but it's weird, isn't it?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top