Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Building Blocks!! Standard Cells

Status
Not open for further replies.
S

santhosh.vlsi

Newbie level 5
Newbie level 5
Joined
Dec 29, 2010
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,332
Hi,

1) Can any one can emphasize on how quickly draw the layouts by referring the schematic. Only Eulers path is the better method ?

2) How to estimate Power bus width

3) How to self learn on skill scripting as its very useful for standard cell layouts(Good material)
 

--> most of the standard cells are "already" designed in one technology...using that the new ones are done in any technology. there are programs to do that. a small number of cells are optimized using hand. the DRC clean up is done manually not the actually layout.
--> Power bus width depends on intended application(speed wise)....9Track, 12Track are used. Power bus depends on the voltage of the final design and speed.
--> skill is used for simple scripts for manipulating layouts but overall layout is not done using skill
 
santhosh.vlsi said:
3) How to self learn on skill scripting as its very useful for standard cell layouts(Good material)
Click to expand...

Start with any tutorial on Perl or Python. Better buy a book and solve the exercises given there.
Remember that it is an inherent nature of scripting language that if you are out of touch with it for a certain period of time you'll tend to forget certain things about it easily.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top