Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Radiation pattern in CST studio

Status
Not open for further replies.
M

magnitude

Newbie level 5
Newbie level 5
Joined
Jan 24, 2015
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
73
Hi,

I would like to know how do I see the XY Co and Cross pol, XZ Co and cross pol, YZ Co and cross pol?

I am using CST Microwave studio 2014 and would like to analyse these results. Please do help me! Thank you!
 

Anyone can help? I am abit confused with the settings ni CST studio 2014.
 

Hi,

Did you get your answer. If you were able to get the cross and co pol radiation pattern, please let me know how you did.

Thanks
 

Hi!

You need to insert field monitors (far-field) at the frequency of interest.
After simulation is complete, you can view the results in the farfield section in the navigation tree on the left side of your window. You can then right click and select polar plot which enables you to select the plane of interest by varying theta (elevation angle) or phi(azimuth angle).

If you require further assistance, it would be easier if you could post screen shots of your 3d radiation pattern.

All the best!
 
  • Like
Reactions: wave85

    W

    wave85

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top