Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] ADE7757 and Wireless Module

Status
Not open for further replies.
Y

yuffiezdincht

Newbie level 4
Newbie level 4
Joined
May 21, 2015
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
30
i am so sorry if this doesn't makes sense to you but i am just a beginner concerning this... so pardon my stupidity... anyway can i connect or interface ade7757 directly to a wireless module? or do i still have to use a microcontroller to do this?

thank you very much...:smile:
 

I believe you can't connect ADE7757 directly to a wireless module. You will need an MCU to interface ADE7757 with an wireless module.
The ADE7757 supplies average real power information on the low frequency outputs F1 and F2. These outputs may be used to directly drive an electromechanical counter or interface with an MCU.
MCU will make Energy Measurement based on frequency output/pulse width of F1 and F2, while CF is used for calibration purpose.
You can then transmit this Energy Measured via Wireless Module.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top