Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Timing path after optimization

Status
Not open for further replies.

kenambo

Full Member level 6
Full Member level 6
Joined
Feb 26, 2012
Messages
393
Helped
52
Reputation
104
Reaction score
48
Trophy points
1,308
Location
India
Activity points
3,859
Hi

I am having setup slack after post Route stage. I decided o manually upsize the cells..

But is it possible to upsize a particular cell and check the timing for that path alone?

and Still problem exists.. I planned to go for grouping the cells or pipelining..

how to group the cells? any command to do that?

thanks
 

In Cadence Encounter, I think report_timing -check_type setup -from ............. -to .............. command will work for your first question.
 
Thanks it works great.

can you please explain how to group particular cells are ports together?

I mean grouping of cells or ports..?

thanks
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top