Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

finding nets between two points in a design

Status
Not open for further replies.
L

limitless_21

Member level 2
Member level 2
Joined
May 17, 2012
Messages
52
Helped
1
Reputation
2
Reaction score
2
Trophy points
1,288
Visit site
Activity points
1,668
Hi All,

I am stuck with a problem where i need a solution to find the nets between 2 points in a design.
Eg. between FF1/Q --> FF2/D
This is for the encounter tool - any command for this or a tcl script ?
Please let me know.

Thanks
Limitless_21
 

use report timing option
It shows the net and arcs between the two points..

From that you get the nets between this reg2reg path.

thanks
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top