Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Behavioral and structural modelling in verilog

Status
Not open for further replies.

tv123

Junior Member level 3
Junior Member level 3
Joined
Mar 16, 2015
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
162
Will the power consumption for a design done in behavioral verilog and structural verilog be same?
 

If your behavioral code infers a different logic when compared to your structural verilog code, then the power consumed will be different.
 

If your behavioral code infers a different logic when compared to your structural verilog code, then the power consumed will be different.

What if both refers to same logic, say , if both refer to a d flipflop?
 

Then it should be the same as post synthesis netlist will be the same.
 
  • Like
Reactions: tv123

    tv123

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top