Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to test GPS module Royaltek REB 1315S4

Status
Not open for further replies.
A

ark5230

Advanced Member level 3
Advanced Member level 3
Joined
Jun 29, 2009
Messages
862
Helped
163
Reputation
324
Reaction score
140
Trophy points
1,323
Location
India
Activity points
6,187
I bought a new Royaltek REB 1315S4 GPS module.
When I connect it to the serial port at the specified baud rate of 9600 it starts giving data.
Even after waiting for long time the position data is not present in GGA. Date and time in RMC are there.
$GPGGA,094253.779,,,,,0,00,,,M,0.0,M,,0000*56
$GPRMC,094253.779,V,,,,,,,170215,,,N*4D

Is there any thing like configuring GPS module ?

Can any on help what is going wrong.
 
Last edited:

https://support.garmin.com/support/searchSupport/case.htm?caseId={7a3953b0-59a8-11e0-6b19-000000000000}
 
ud23 Thanks for quick reply.
It is connected to computer via RS232 serial port.
It is getting data.
But the problem is that it does not containd longitude latitude information in the GGA line as shown above.
My problem is that:
1. does the GPS module need configuration.
2. Is it working properly but I am not able to use it.
3. else what is going wrong.
Please advise

New issue:
after some time when I tried the same there is no input from the GPS module.
No response no NMEA lines.
 
Last edited:

The link doesn't seem to refer to specific information. I guess the UID is a temporary tag, or only valid for a specific user.

Please consider also forum rules: Links should be clickable.

- - - Updated - - -

First item to look on: number of satellits in view.
00 most likely means:
- antenna connection not working, e.g. active antenna without power supply etc.
- a place without any sky visibility
 
FvM
A line of advise as to how to proceed please.
Oh thanks it already there, came in just now.
Thanks and regards

- - - Updated - - -

I checked those two, antenna and climate visibility it is clear.
There are two LED's
On glows continuously, must be power.
The other one comes initially for a second and goes.
 

Attachments

  • GPS.jpg
    GPS.jpg
    2 MB · Views: 70

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top