Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need layout guidelines for MMA955XL

Status
Not open for further replies.
V

vishu489

Advanced Member level 4
Full Member level 1
Joined
Aug 28, 2011
Messages
116
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Visit site
Activity points
2,120
Hello guys,

Actually I'm working on MMA9553l and I need some routing guidelines for the same.

In datasheet they have said that keep the analog and digital ground and power plane separate and connect them near to power supply. Is it really necessary to do that?
Is it safe to keep analog and digital power in same plane? will it create any accuracy problem?

If someone has done this before could you please share your work?


Thanks,
vishal
 

The easiest way to do this job, you may keep Analogue and digital ground separate and use 0R resistance to connect both plane some where near power supply. It would be helpful for you during debugging.
 
Hey ashad,

thanks for your reply!

What about power plane ? is it necessary to separate them also since i'm using single 1.8v supply for both.
 

vishu489 said:
What about power plane ? is it necessary to separate them also since i'm using single 1.8v supply for both.
Click to expand...

I will recommend you to design two separate planes as per instructions written in datasheet. I used MPU6000 recently and having same issue. I designed two seperate plane for both analogue and digital gnds and connect both planes with 0R at one point.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top