Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RFID tag antenna design

Status
Not open for further replies.
K

Karrar Naji

Newbie level 5
Newbie level 5
Joined
Jan 31, 2015
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
62
Hi everyone,
I am working on RFID tag design and i want to choose the chip so i have chosen Alien higgs 4 , they mention in the datasheet the parallel capacitance input is equal to 0.89 PF and the resistance parallel input is 1800 K ohm but when i have read some papers they mention the Higgs 4 chips impedance is equal to (18-181j ) , so if anyone can help how to get the impedance of the chip from datasheet ? especially for Alein higgs 4 or Allein Higgs 3 .

thanks
 

I think the (18-181j) ohm is the series impedance at one particularly frequency point.
So draw a circuit with a 1800 K ohm resistor and a 0.89 PF capacitor in parallel. Then calculate the impedance form this circuit at your frequency. At 900 MHz the impedance is (21 - 196j) ohm
 
thanks flanello , so at 915 Mhz the impedance is (20.97-193.2j) ohm , right?
 

Alternatively, the chip input impedance is calculated by ADS software. Thus, one has to simulate its chip first in ADS in order to obtain the approximated chip input impedance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top