Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Windshield RFID Tags Environmental Effect

Status
Not open for further replies.

Asmara Tofique

Newbie level 4
Newbie level 4
Joined
Jan 14, 2015
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
42
Hello !!
Guys i am working on Windshield RFID Tags and i have to check the environmental effect on it. I want to know how can i check the environmental effect in HFSS 13.0??
Kindly Help
 

Hello !!
Guys i am working on Windshield RFID Tags and i have to check the environmental effect on it. I want to know how can i check the environmental effect in HFSS 13.0??
Kindly Help

Locate the RFID inside under glass, then you need not to solve any enviro effects.
 

Okay Thanks for your concern :)
But how environmental effect can be checked?
 

Environmental effect such as humidity and heat.
 

Environmental effect such as humidity and heat.

For temperature and humidity testing there are test chambers in which both effects can be varied and calibrated.
A good RFID device is designed to be weatherproof, so installing it inside of a car reduces the external effects to a minimum. Good RFIDs also include environmental specifications within which they work properly.
 
Yes, climatic chambers to perform real tests. The OP is however asking how to "check the environmental effect in HFSS".

My general answer is: You probably can't because the major enviromental effects are caused by component degradation which can be hardly modelled.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top