Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Simple MAT QUESTION [Circle]

Status
Not open for further replies.
O

other-side-of-d-moon

Advanced Member level 4
Full Member level 1
Joined
Oct 18, 2010
Messages
100
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Activity points
1,961
Dear guys

Any one can help me to calculate the length of A1 A2, B1 B2, and C1 C2 in the following figure

Screen Shot 2015-01-11 at 8.26.32 PM.png


Regards
 

Incomplete homework excercise problem. Length depending on which parameter?
 

The position of the intersecting line has to be specified somehow. Distance to center would be one of several ways to do it.

I don't believe that it's unspecified in original excecise problem. You apparently missed to retell the full specification.
 

In the circle in Figure A, C1 and C2 is a segment. Length of segment can be anything between 0 to 10. It cannot be specified. Insufficient data to calculate the length. Either the angle from the center or from C or the distance from the center has to be specified.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top