Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

acceptable side lobes and back lobe levels in derective antennas

Status
Not open for further replies.
N

noorulain069

Newbie level 3
Newbie level 3
Joined
Dec 15, 2014
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
26
hello
plz tell me what should be the acceptable back lobe and side lobe level in dB scale,if my main lobe is at 15 dB?
noor
 

there isn't any general value for that.

it depends on the requirements of your application (if you are a user) or the specification asked by a client (if you are a manufacturer)
 
Antenna stray lobes depend on desired interference levels required for directivity reception or transmission.

15 dBi peak with 0dBi lobes may be adequate for some applications but for a RADAR signal it might need to be -40dBi depending on dynamic range of signals.
 

SunnySkyguy said:
Antenna stray lobes depend on desired interference levels required for directivity reception or transmission.

15 dBi peak with 0dBi lobes may be adequate for some applications but for a RADAR signal it might need to be -40dBi depending on dynamic range of signals.
Click to expand...

thank you so much...
stay blessed... :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top