Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Very Compact AC to DC Converter Design, Source For Very Small Components

Status
Not open for further replies.
M

martisxxl

Newbie level 4
Newbie level 4
Joined
Oct 8, 2014
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
52
Hello everyone, i am making a wireless charger for my phone. I need to fit a small ac to dc circuit in my phone's back(<1mm).
I can't find small diodes ( i need to convert 5v, 1a or more). Can you post a schematic with small parts ? Thanks.
 

Most phones have a charger circuit inside that needs 5VDC. If you rectify 5VAC then it produces fluctuating 5V, not steady 5VDC because a pretty big filter capacitor is also needed.
How will you make the 5VAC wireless? With huge coils?
 

I will use a microcontroller to make a 200khz signal, then through transistor, and then through a coil with capacitor (parallel).
Then in the receiver same coil with a capacitor, and then i would need to convert the ac to dc.
Some ideas???
Sorry for bad english...
 

To get a DC current as high as 1A and using a frequency of 200kHz then the coils will probably be fairly large and/or have a ferrite core.
Since the coils probably must touch together then why not use a plug and jack?
 

For wireless charging, you want to operate at a higher frequency to allow small component sizes, 200kHz is good. Look for the wireless charging standards like Qi and you'll find chips for transmitting and receiving.

- - - Updated - - -

http://uk.mouser.com/m_new/vishay/vishaydaleiwas/
 
Thanks, but i need to do it for a project, so these microchips are not a good idea. I do not need to communicate with my device or to make it very efficient :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top