Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] how to increase current?

Status
Not open for further replies.
P

palakpatel6188

Newbie level 5
Newbie level 5
Joined
Sep 3, 2014
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
61
Hello,
i have made a variable voltage source but i didnt get the desired output current .
Suggest me to the way to increase current withuout changing the current with circuit.
I have seen so many methods but i dont know how to use it?
i have tried emmiter follower and common emmiter but voltage is changing at the output.
desired output current 200ma.
Thanks,
palak Patel
 

Hello Patel, It would be easy to answer your question in an appropriate way if you could elaborate your circuit and your application requirments.
 
hi palak,
Could you post a circuit of your power supply, its impossible to suggest changes without seeing your circuit.
E
 
Hello!

You CANNOT control current and voltage simultaneously.
If you want 200 mA, then you have to adjust the voltage so that you have 200 mA.
If you want to define the voltage, then the current will depend on your load.

Dora
 
Ghurki said:
Hello Patel, It would be easy to answer your question in an appropriate way if you could elaborate your circuit and your application requirments.
Click to expand...

p.PNG
ouput at the output of the opamp..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top